91 results
HALLSTAR DIOPLEX 904 is a medium viscosity polymeric plasticizer with excellent properties for many demanding applications, exhibiting good migration behavior, resistance to extraction by both water and detergent solutions combined with food cold flex properties.
HALLSTAR DIOPLEX 904 IS AVAILABLE GLOBALLY.
HALLSTAR DIOPLEX PLA is a medium viscosity polymeric plasticizer, with excellent properties for many demanding applications, exhibiting good migration behavior, marring resistance and resistance to extraction by water and detergents. Versatile food contact approved polymeric plasticizer for demanding applications.
HALLSTAR DIOPLEX PLA IS AVAILABLE GLOBALLY.
MAGLITE D-SSF is a high purity lightly calcined high surface area very active magnesium oxide. It’s primary use is to neutralize acids formed during processing of elastomer compounds. This high quality magnesium oxide is produced through a precision controlled seawater extraction process which produces consistent unique crystal morphology.
PARAPLEX G-30 is a low molecular weight polymeric plasticizer which offers a good balance of permanence properties. G-30 has better compatibility than other polymeric plasticizers. When service conditions include high humidity high temperature and exterior exposure G-30 would be a good choice.
Plasthall P-643 is a low to medium molecular weight polyester plasticizer. It is well suited for applications requiring FDA acceptance. Plasthall P-643 has extraction and migration resistance superior to typical monomeric plasticizers especially where stress cracking resistance is important.
SUPRMIX® 1312 LV ends the handling problems associated with high viscosity by our putting the material on an amorphous silica carrier. SUPRMIX® 1312 LV is a low viscosity grade. SUPRMIX® 1312 LV provides all the benefits without the necessity for heating the liquid to make it more easily handled and weighed. SUPRMIX® 1312 LV is a free flowing, powdered dispersion that speeds mixing. SUPRMIX® 1312 LV is used in molded and extruded products, covered rolls, plastisols, and adhesives.
SUPRMIX® D-148 eliminates the problems in weighing and the need to scrape out the weighing container during the mixing cycle by our incorporating the D-148 process aid on our amorphous silica carrier to make a free flowing powder dispersion. SUPRMIX® D-148 can be used effectively in place of several higher priced products. It is neutral in most cure systems and contains no waxes or silicones to affect adhesion or bonding qualities. It is highly compatible in SBR, CR and is also useful in natural rubber and EPDM.
SUPRMIX® EPON® 828 is a dispersion of this extremely useful, but viscous liquid on our amorphous silica carrier. The result is a free flowing, easy-to-handle powder that incorporates quickly into rubber compounds. SUPRMIX® EPON® 828 is used as a tackifier, cross-linker and adhesion promoter in rubber, coatings, composites, chemical resistant tank linings, grouts, electrical applications, construction, castings, flooring, concrete, adhesion formulations and many other uses too numerous to list.
SUPRMIX® PARAPLEX® G-25. We put our own Paraplex® G-25 on our amorphous silica carrier to make a free-flowing powdered dispersion. All of those benchmark properties of HallStar’s Paraplex® G-25: permanence; compatibility; retention of physical properties at prolonged service at high temperatures; excellent resistance to extraction in/by gasoline, oils, detergents and soapy water; and freedom from migration into plastics, rubber, lacquers, alkyds, and varnish finishes are retained —- just in a form that is remarkably convenient to handle, weigh, and mix.
SUPRMIX® PARAPLEX® G-30 is a low molecular weight polyester dispersed on an amorphous silica carrier. SUPRMIX® PARAPLEX® G-30 provides a free flowing, easy to handle powder that incorporates quickly into rubber compounds and offers good balance performance properties at low cost. SUPRMIX® PARAPLEX® G-30 shows exceptional compatibility with vinyl resins over a wide range of environmental conditions; high humidity, high temperature, and exterior exposure.
Suprmix® Paraplex® G-50 is an extremely versatile polymeric adipate plasticizer. It has been recognized for decades as an ideal material for such various flexible PVC applications as vinyl coated fabrics, decals, and laminates. Suprmix Paraplex G-50 is a free-flowing powdered dispersion, that is remarkably convenient to handle, weigh, and mix.
Suprmix® Paraplex® G-59 is an intermediate molecular weight polyester adipate dispersed on an amorphous silica carrier. Suprmix® Paraplex® G-59 provides a free flowing easy to handle powder that incorporates quickly into rubber compounds, that are remarkably convenient to handle, weigh, and mix.
SUPRMIX Plasthall 226(DBEEA) is a compound consisting of 72% Plasthall 226 and 28% substrate. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it had been incorporated as a neat material.
Suprmix® Plasthall® A-9000 is a very popular and versatile polymeric phthalate with an average molecular weight of 560 and a viscosity range of 1,000 to 1,3000 centistokes. Suprmix® Plasthall® A-9000 provides the excellent extraction resistance to polar fluids and humid environments, making it well suited for outdoor applications and rubber roller.
Suprmix® PlastHall® DBS a free-flowing powder by using our amorphous silica carrier, weighing, delivery, and incorporation headaches are minimized. Suprmix® PlastHall® DBS is so efficiently incorporated during the mixing steps that often the PHR (Parts per Hundred Rubber) level can be reduced while the same physicals and durometer hardness are retained
SUPRMIX Plasthall DIDP is a compound consisting of 72% Plasthall DIDP and 28% substrate. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it had been incorporated as a neat material.
SUPRMIX SR-172 is a compound consisting of 72% SR-172 and 28% substrate. SUPRMIXes permit liquids to be handled as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it has been incorporated as a neat material.
We’re sorry. There are no products that match your selected specifications. Please revise your search criteria or contact us to submit a request for custom technology.
Submit your request now.
© 2024 Hallstar. All Rights Reserved.
Distributor Login