Plasthall 7050 is a monomeric plasticizer that exhibits extremely good compatibility with practically all types of natural and synthetic rubber.
Plasthall P-7050 combines low volatility with high efficiency, and contributes low temperature properties, which is unusual when one such quality usually detracts from the other. Plasthall 7050 exhibits extremely good extraction resistance against oils and solvents when compared to other monomeric plasticizers.
| Acid Value, mg KOH / g | 0.5 |
| Appearance | Clear |
| Color, Gardner | 2 |
| Moisture, % | 0.08 |
| Refractive Index, 25°C | 1.447 |
| Specific Gravity, 25°C | 1.058 |
| Packaging |
|
|---|
| Plasticizer, pphr | 20 |
| Shore A Hardness | 60 |
| Low Temperature Brittle Point, °C | -33 |
| Tensile Strength, psi | 1950 |
| Ultimate Elong., % | 550 |
| Percent Change by: | |
| Volatilization | -4.0 |
| ASTM #1 Oil | -8.2 |
| ASTM #3 Oil | +1.1 |
| Distilled water extraction | +1.1 |
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
© 2024 Hallstar. All Rights Reserved.
Distributor Login
Print 
PDF