PARAPLEX G-30 is a low molecular weight polymeric plasticizer, which offers good permanence properties especially with oils and hydrocarbons. PARAPLEX G-30 shows exceptional compatibility with vinyl resins over a wide range of environmental conditions: high humidity, high temperature, and exterior exposure. It also offers processing features typical of monomeric plasticizers: fast fluxing, excellent dry-blending characteristics, low viscosity and good calendaring properties. Compounds plasticized with PARAPLEX G-30 show outstanding durability when exposed to outdoors weathering.
PARAPLEX® G-30
Common Name: MIXED DIBASIC ACID POLYESTER
Product Code: 3740
Brand:
Paraplex®
Acid Value, mg KOH / g | 0.7 |
Appearance | Clear |
Color, APHA | 150 |
Moisture, % | 0.05 |
Refractive Index, 25°C | 1.498 |
Viscosity at 25°C, cSt | 1,200 |
Packaging |
|
---|
PVC
Plasticizer, pphr | 67 |
Shore A Hardness | 79 |
Low Temperature Brittle Point, °C | -7 |
Tensile Strength, psi | 2550 |
Ultimate Elong., % | 430 |
Percent Change by: | |
Volatilization | -8.4 |
Oil extraction | -5.1 |
Hexane Extraction | -4.8 |
Distilled water extraction | -0.77 |
Soapy water extraction | -16 |
High humidity | -0.29 |
Migration | |
Polystyrene | Poor |
ABS | Poor |
Nitrile
Plasticizer, pphr | 20 |
Shore A Hardness | 69 |
Low Temperature Brittle Point, °C | -21 |
Tensile Strength, psi | 1750 |
Ultimate Elong., % | 490 |
Percent Change by: | |
Volatilization | -4.4 |
ASTM #1 Oil | -9.9 |
ASTM #3 Oil | -4.0 |
Distilled water extraction | -5.4 |
Gasoline extraction | -5.8 |
Global Compliance:
- China
- EU
- USA
Polymers:
- Cellulose acetate butyrate
- Cellulose acetate propionate
- Chlorinated rubber
- Epichlorohydrin
- Hydrogenated nitrile
- Methyl methacrylate
- Nitrile
- Nitrocellulose
- Polyvinyl acetate
- Polyvinyl chloride
- Vinyl chloride acetate
Applications:
- Coated fabrics
- High temperature applications
- Outdoor use
- Upholstery
- Vinyl foam
- Wall covering
- Wire & cable
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
Safety Data Sheets
Product Documents
- Environmental Impact of Using Suprmix® Versus Liquid
- Ester Plasticizers for Elastomers
- Ester Plasticizers for Hydrophilic Print Roll Compounds
- Ester Plasticizers for Polar Elastomers with Emphasis on Low Temperature
- Ester Plasticizers in Hydrin
- Esters for PVC Coatings: Food Packaging
- Food Contact Information Sheet – USA
- Formulating with Plasthall® UVC
- HallGreen® Esters in PVC
- Hallstar Phthalate Alternatives Comparison in PVC
- Improved Processing with Powder Liquid Dispersions
- PVC Basics
- Phthalate Alternatives Comparison in Medium ACN Nitrile
- Plasticizers for CPE Elastomers
- Plasticizers for PVC Brochure
- Plasticizers for SMP Sealants
- Reactive Ester Plasticizer for Elastomers
- Stress-Cracking Resistance of Polycarbonate in Contact With Plasticized PVC Compounds
- TP-Series Plasticizers