MONOPLEX DOZ is an excellent low temperature dibasic acid ester. This ester is primarily used for PVC applications that will be exposed to extreme cold. In addition, MONOPLEX DOZ offers excellent efficiency characteristics. Finally, MONOPLEX DOZ imparts a glossy yet dry surface to PVC parts as well as excellent “hand” and drape properties. Both MONOPLEX DOZ and Plasthall® DOZ are chemically the same they differ in specifications. MONOPLEX DOZ has a tighter color specification.
Acid Value, mg KOH / g | 0.5 |
Appearance | Clear |
Color, APHA | 90 |
Moisture, % | 0.05 |
Refractive Index, 25°C | 1.4485 |
Saponification Value | 273 |
Specific Gravity, 25°C | 0.916 |
Packaging |
|
---|
PVC
Plasticizer, pphr | 67 |
Shore A Hardness | 66 |
Low Temperature Brittle Point, °C | -56 |
Tensile Strength, psi | 1875 |
Ultimate Elong., % | 385 |
Percent Change by: | |
Volatilization | -14 |
Oil extraction | -28 |
Hexane Extraction | -33 |
Distilled water | -2.7 |
Soapy water extraction | -12 |
High humidity | -1.9 |
Global Compliance:
- China
- USA
Polymers:
- Chlorinated rubber
- Ethyl cellulose
- Nitrile
- Nitrocellulose
- Polyvinyl chloride
Applications:
- Adhesive and sealant
- Gaskets
- O-rings
- PVC Film
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
Safety Data Sheets
Product Documents
- Environmental Impact of Using Suprmix® Versus Liquid
- Ester Plasticizers for Elastomers
- Ester Plasticizers for Hydrophilic Print Roll Compounds
- Ester Plasticizers for Polar Elastomers with Emphasis on Low Temperature
- Esters for PVC Coatings: Food Packaging
- HallGreen® Esters in PVC
- Hallstar Phthalate Alternatives Comparison in PVC
- Improved Processing with Powder Liquid Dispersions
- New Line of Modifiers for Low Polarity Elastomers and Plastics
- PVC Basics
- Phthalate Alternatives Comparison in Medium ACN Nitrile
- Plasticizers for CPE Elastomers
- Plasticizers for PVC Brochure
- Stress-Cracking Resistance of Polycarbonate in Contact With Plasticized PVC Compounds
- TP-Series Plasticizers